Solutions to improve the quality of life
RIC hearing aids take their name from being Receiver In the Canal hearing aids.
Traditionally, hearing aids have an earhook which attaches to a tube which attaches to an earmould. With a RIC hearing aid the 'bit' that 'makes the sound' is an earpiece or 'receiver' which sits in the ear canal and is connected to the hearing aid via a small wire - often referred to as receiver wires.
Each hearing aid manufacturer has their own type of earpiece/receiver wires - although Phonak & Unitron both use the same type.
On the housing of Phonak earpieces there is coloured labelling - blue for left and red for right. The length or size is shown by a number (0,1,2 or 3) and the power by xS for standard and xP for power e.g. 2xP.
If you do not already have one you will need to order a removal tool to replace receiver wires - part no 3PATOOL1.
Included in the pack is a selection of domes – a small, a medium and a large dome are included - open domes are supplied with Standard Receivers and power domes with Power Receivers.
Custom xUP Ultra Power receiver wires are available for some models by special order direct from Phonak.
Please note, before purchasing replacement receiver wires please make sure that you know how to safely remove and replace them yourself. Connevans will not accept any responsibility for any damage to hearing aids when you replace/fit spare parts.
Domes need to be ordered separately; open domes are normally used with standard receivers and power domes with power receivers.
Please note for hygiene reasons these products are excluded from the Connevans extended returns policy.
3PATOOL1
Phonak & Unitron pin removal/fitting tool
3PCERUSTOP
Cerustop white wax guard 8 pack
3P0040628
Pack of 10 Phonak Hearing Aid Retention Arm for Standard ...
3P0540103
Phonak standard RIC xReceiver wire - size 0, right ear
3P0540102
Phonak standard RIC xReceiver wire - size 0, left ear
3P0540105
Phonak standard RIC xReceiver wire - size 1, right ear
3P0540104
Phonak standard RIC xReceiver wire - size 1, left ear
3P0540107
Phonak standard RIC xReceiver wire - size 2, right ear
3P0540106
Phonak standard RIC xReceiver wire - size 2, left ear
3P0540109
Phonak standard RIC xReceiver wire - size 3, right ear
3P0540108
Phonak standard RIC xReceiver wire - size 3, left ear
3P0041032
Pack of 10 Phonak Hearing Aid Retention Arms for Power xR...
3P0540236
Phonak power RIC xReceiver wire - size 0, right ear
3P0540235
Phonak power RIC xReceiver wire - size 0, left ear
3P0540238
Phonak power RIC xReceiver wire - size 1, right ear
3P0540237
Phonak power RIC xReceiver wire - size 1, left ear
3P0540240
Phonak power RIC xReceiver wire - size 2, right ear
3P0540239
Phonak power RIC xReceiver wire - size 2, left ear
3P0540242
Phonak power RIC xReceiver wire - size 3, right ear
3P0540241
Phonak power RIC xReceiver wire - size 3, left ear
3P0540538
Adaptor to allow current Phonak RIC receivers to be used with...
Phonak & Unitron SDS 4.0 RIC receivers - Standard, Medium...
These domes are for use with Phonak's range of hearing aid...